Bogwood anyone?

Hi,
does it make sense of trying to make a flute out of Bogwood? is it good wood for turning?

cheers!
Pola

The late Tom White made himself a flute out of bog wood during the 1980s.

You’ll need to find a good size log that isn’t split though and they are rare enough.

Peter, any idea who in Ireland stocks Bogwood and might have a suitable piece?
by the way, I love your music with Kitty, keep up the great music.

Not sure anyone stocks it, farmers and builders pull it out of the ground and usually burn it. There are a few trunks sticking out of the field across the road though. Seriously, there are a few places that do courses in bogwood sculpting, you may find them on the net. No harm in asking them. Other than that, it’s asking farmers clearing fields or cutting turf, they’re usually glad you take it off their hands.

Used in sculpture you may get this sort of thing:

Well…I can tell you, Bog wood turns very, very nicely. As Peter pointed out finding a piece that isn’t split through is very rare. And once you have it turned there are no guarantees that it will remain stable!!

A couple years ago an archeologist friend gave me some nice bogwood pieces she’d uncovered on a dig, with an eye of having me make a flute or whistle out of some it. I’d worked with bog oak before, and found it a suprisingly easy material to work with… at first. She gave me a whole suitcase full of pieces of various sizes and species. After I came back to my senses, I thought I have enough to make a couple flutes, whistles and a set of pipes, with plenty to spare.

There was plenty of oak and what might have been sycamore. After converting it to billets, we air dried it for about a year and half, which should have been ample time for stock of this size. Out of all that lovely timber only one piece didn’t have visible cracks or checks, that was big enough to get a whistle body out of. (Then again, after 4 or 5 thousand years in a peat bog, you’d be fairly cracked up too!)

I managed to get a body turned and bored out of this piece. I worked slowly, following the advice of others and my previous experiences with bogwood. While I was working on the fipple/head section (out of another piece) the body revealed fine cracks that opened up. (Mind you all this was done in a reasonably climate controlled shop in a museum I did some work for at the time, so humidity seemed an unlikely culprit.)

In the end…I did wound up turning out some lovely jewelry for her… I still have some of the bogwood, some of which I used on small bits a couple harps. My hope is to use some as mounts on a set of pipes some great day. (I’m in the humbling process of learning pipemaking and collecting timber and tools, but that’s another story…)

There are timber merchants in Ireland and the U.K. that sell the odd piece of bogwood or two. As unlikely as it seems, I did get some very good small pieces from a woman in England who collects and sell it…via Ebay. Look around the net, and you’ll find them. One merchant who might have some is “Interesting TImbers” in Bath, England.
http://www.interestingtimbers.co.uk/

Good Luck!

One of the problems is probably most wood pulled out of the ground are roots left when the trees were cut, they are all knotty and bent.

From the pieces I have I would think you might be luckier with yew than with oak.

Developers put up a new estate near Inagh over the past few years (essentially tripling the size of the village, the modern face of Ireland, the west Clare commuter belt), there are several lorry loads of bog oak left by the roads side there that I pass a few times each week. A beach here between Quilty and Caherrush is full of the remains of an ancient oak wood. There is quite a lot of it around.