A pipe maker I know was copying a Rowsome chanter. In comparing bores with other makers, he found another maker had an internal profile extremely close to the Rowsome he was copying. The difference was that the other maker’s tone-holes were higher up on the chanter, so therefore were smaller in diameter. He made two chanters with the same reamers from the copy of the Rowsome chanter and placed Rowsome tone-holes in one, per the original and the smaller tone-holes on the second chanter. The Rowsome copy sounded like the original Rowsome, while the other one had a different tonal character altogether. Rowsome chanters are desired by many due to the wide tonal characteristics available on them. The chanter with the smaller tone-holes had a different timbre altogether and was not capable of producing the same range of expression and tonal color as the Rowsome. I know of a couple of makers who supposedly copied a Rowsome bore for their chanters, but also wanted to use smaller tone-holes. These chanters do not sound or act like any Rowsome but are sold as “based on Rowsome”. Willy or Leo chanters are known for their large tone-holes, no matter what period they were made in. It seems obvious that is a variable worth considering when looking at chanters based on either Rowsome. I think Leo sacrificed tuning issues in favor of tone. As has been pointed out, you can “fix” many tuning issues in a Rowsome copy, but will have a different tone from the chanter as a result.
Below is an excerpt from Tim Brittons website:
“Whose pipes are yours modeled after?
I started with a Rowsome chanter design and drones and regulators designed after scrutinizing many sets. Over the years, I made alterations in an attempt to fix small but chronic problems. A few years ago, I decided to reassess the chanter design and went back to measurements of Liam O Flionn’s Rowsome chanter from a drawing by the original owner, Sean Reid. I reintegrated this into a new design based on all my experience to date.”