So I lucked into a small aluminum case that’s perfect for whistles and would like to line it with pinch foam. When I’ve tried this before I’ve used double sided tape to attach it and that never worked out that well. Any suggestions for other adhesives?
Thanks.
If Its a soft Urethane based foam then any contact adheseve will do. Do a test on a bit if the contact doesn’t dissolve the foam it’s fine. Contact is best because it remains flexible.
I retrofitted an old clarinet case to hold my flute and used foam wrapped in microsuede. I used craft glue (like a heavy duty Elmer’s white glue) for both the foam and fabric. It’s held up great. The only downside was that it took a full 24 hours to completely dry, and then another 2 or 3 days for the smell to clear out (not a wicked chemically smell, more of a mild Elmer’s smell).
If you take the foam to a craft store, they’ll be able to recommend the best glue.
Possibly a spray adhesive from crafts store.
Kevin Krell
Millions of American crafters can’t be wrong . . . this is a job for a GLUE GUN.
It is nontoxic and stench-free. Bonds fabrics, foams, artificial flowers, holiday decor, china and ceramic, wood, furniture and kitchen counter veneer, leather, vinyl, book bindings, and a host of other things without soaking through, dissolving, making a mess, or requiring a trip to the ER to have yourself removed from your project. .
They’re cheap, too. You can get a basic model for a few bucks. Try Walmart or Home Depot if you don’t have a craft store like Michael’s or Joanne.
Keep a sheet of tinfoil under it while it’s melting. No cleanup is required–you just unplug it and let it cool, and it’s ready to go for the next time.
Great, thanks for the replies!
I may have to go for the glue gun, because that would mean getting a new toy. 