Learning to shave with a straight razor

I saw a snail crawling on the edge of a straight razor. And live.

That is my dream. That is my nightmare.

You guys are silly. I have not been able to find anything better than that Mach 3 thing. It’s really a good little shave. Granted, I’ve never tried a straight razor.

You really should check out that double-edge safety razor I linked to…that’s probably what I’ll switch to when my electric bites the dust. However, given the longevity of the other Braun products I’ve used, that probably won’t be for another 15 years at least, during which time I would have wasted a lot of water, bought a lot of cans of shaving cream (or bars of shaving soap), and disposed of a lot razor blades if I were using a standard razor. Most of the environmental reviews I’ve seen place the straight razor as the greenest choice, followed by the electric, and then the standard refillable razors, with disposables as the worst choice.

I have two friends who tried using a straight razor and both of them gave up after a few months. It wasn’t that they were cutting themselves, it’s just that it took too much time and effort, especially the sharpening bit. Why do you think safety razors appeared on the market in the first place?

The itching goes away after a few days.

Yeah, about 8 or 9 days after the itching stops!

I been doin’ the goatee thing this summer. Mostly, I am just lazy and don’t bother cleaning up but every three days or so, then with an antique electric razor that does a crappy job. I played a wedding gig a week ago, and actually used the Mach whatever and I have to say, I looked a lot more “defined.” Even younger, a bit.

After reading this, I am going back to the full beard. I hate shaving, period. You guys are reminding me. But I never got itchy from having a beard so I can’t relate to that. I also never get a face sunburn with a beard, which I really like.

You really have nothing to lose, Lor. Just get a straight razor at a thrift shop, sharpen er up and give it a try.

Oh yeah: I read somewhere that putting Mach whatevers in WARM or HOT water actually dulls them a bit. You are supposed to only immerse or rinse them in cold water for some molecular reason. Counter-intuitive to the practice of having a nice basin full of hot water while you shave.l

PS. I do think that softening your skin up with the old fashioned brush and soap helps things a lot, more than cheez-whiz for shaving stuff…

Just found this Yahoo group for those interested: http://health.groups.yahoo.com/group/straightrazorplace/

Brad, I wonder if your friends who tried straight razors and gave up were using razors with stainless blades, rather than old style high carbon blades. Stainless sucks for holding and edge and sharpening. From what I understand, a really good blade shouldn’t need much other than a daily strop and a little honing a few times a year.

My grandfathers both used those old safety razors, but I don’t recall if I ever tried one when I was younger. Might give 'em a try if the straight razor thing doesn’t work for me.

BTW, using and electic was fine for me when as well, when I was sporting more of a beard.


Loren

Ditto on stainless. Great at first.

I have never used an electric razor that didn’t leave me feeling like I needed a shave. They are crap.

These multiblade jobbies are nothing new. I remember using precursors to them in a safety-razor style back in the 70s. The new plastic-handled ones are worth about one shave, and are a terrible load on our landfill sites.

The business of rinsing your razor (of any type) with cold water is nothing new. It is supposed to reduce the amount of skin irritation. First clean your skin and soften your beard with hot water before soaping, but when you’re actually shaving, switch to cold water.

I am still using a safety razor. I can hack my face up pretty good with it without needing to go the extra step of carving whole chunks of myself off with a straight razor. I can’t see any savings buying the thingy from Vermont as Brad suggests. By the time I got it across the border and paid duty and taxes on it there would be no savings. I’ll just stick with my Schick or Gillette safety blades.

One thing that does “p” me off is that you can’t get good shaving soap anymore. As was mentioned above, all that’s left is the spray cans of foaming goo. My favourite was Palmolive’s Caribbean Lime, partly because it smelled so good, and partly because my dad used it. The smell always reminded me of him and getting hugs when I was little (he died long ago).

djm

Yeah, I hate shaving as well, however I did the goatee thing for years and am over it, plus my beard has turned about half grey in the last 3 years, and I simply don’t look that old, nor do I want to.

You really have nothing to lose, Lor. Just get a straight razor at a thrift shop, sharpen er up and give it a try.

Right you are, I expect I’ll have at it here before too long.

Oh yeah: I read somewhere that putting Mach whatevers in WARM or HOT water actually dulls them a bit. You are supposed to only immerse or rinse them in cold water for some molecular reason. Counter-intuitive to the practice of having a nice basin full of hot water while you shave.

Hmm, I missed that bit somewhere along the way, I’ll have to try the cold water rinsing between now and when I find a good, inexpensive straight razor.

PS. I do think that softening your skin up with the old fashioned brush and soap helps things a lot, more than cheez-whiz for shaving stuff…

Oh come on dude, if it comes in a can it’s GOT to be good!! :laughing:



Loren

Here ya go Loren!

Ah, but consider the sad fate of Henry Thoreau’s brother, John, as described by John McPhee in the intro to the Princeton Univ. Press edition of A Week on the Concord and Merrimac Rivers:

John was his brother’s best friend, perhaps his only close one. After nicking himself with a razor, John died of tetanus at the age of twenty-seven.

I’ve had my beard since I was 18 (I’m now 47). I shaved it off once in my mid-30s and it did in fact make me look at least 10 years younger. Unfortunately it also made me look almost exactly like Bert, the muppet character in Sesame Street, because I have no chin.

My dad was a barber and I have all his straight razors. They are the carbon steel variety and are incredibly sharp. I 've got the sharpening stones, leather strop, boar brushes as well. I remember him sharpening them on his day off. I think one of the handles is ivory.

I tried to use one, way back in the begining of time and failed. I did use one of those blue steel gilette blades ( two edges and you had to take the holder apart to put the blade in).

I use one of those tripple edge jobbies, but since my beard ( being filipino, it don’t happen) is light, I can make it last and last.

:laughing: Well, chin I got, although I’m no Kirk Douglas :stuck_out_tongue: It’s great for holding up the flute and keeping it in place.



Loren

Well, I guess you’re one of the lucky one’s then!


Loren

Okay, we have Chiff and Fipple, so what do you think the shaving aficianados have as an equivalent? Come on, take a guess…



Why it’s C&F’s Most Dangerous Cousin: Badger and Blade, of course! :laughing: (It appears to be about all things shaving related, not straight razor specific, although they do have a straight razor forum)

http://www.badgerandblade.com/vb/index.php

Gotta love it, heh heh…

Loren

I used a straight razor for a few years back in the early 70s. It was the green thing to do except they didn’t call it green back then. I got a razor for free from a friend whose father had a collection of them. I took it to get it sharpened, got a stone and a strop and a brush and a mug and I was in business. It’s really not too hard to do. The main big rule is NEVER move the blade sideways when it’s touching your face. You WILL bleed. If you remember to only move the razor in a direction perpendicular to the blade you will get along real nice.
Mike

I will nolonger use a straight razor. The last few times I did was for purposes not intended by the creator of this item. I have the scars and the rosy cheeked face of embarrassment to show for it. :laughing:

Stick to the safety razor dude; I’ve used a Mach 3 for many years now and love it - I see no need for the super charged turbo 5 blade models or any of that c–p. That said, they do something with the blades to promote unnecessary sales that for example Dell does with its ink cartridges. The blade pack warns you to use a new blade when the dark green line gets very light; that’s generally bull; I change blades when the blade stops feeling right and ignore the line.

Dell, the sole supplier of ink cartridges for its printers, has built in skull and cross bones warnings of empty ink cartridges; these are time generated not reality generated and appear WAY too soon in an effort to get you to purchase the very expensive cartridges way early and often. I replace when I see signs in my printed material that printing is beginning to appear less than optimum - often months after the warnings begin. That said, Dell cartridges are no more expensive than others and the printers have been cheap and great for my uses.

Uh oh, highjacked a thread! Sorry.

Philo

Well, goatees and beards may be out, I dunno. I always figure with Winter coming, they come back in. What I like about that is that the beard kinda hides how plump my face gets from all the holiday over-eatin. The Santa look.

What is big out here are these strange tiny wedges of hair below the lower lip. I guess its a cyclical thing, working downward from goatees, which remain big with sports types. When I ponder these things, I always get the mental picture of the dude staring in the mirror too long to be a manly man…Vanity strikes. I’m too old to spend a lot of time looking in the mirror, especially since I can’t see that well, and what I do see, I don’t much care for.

The facial hair cycle reminds me of eyeglasses, which went from completely big and round to little, square and flat over the years. In each case, there was somebody thinking they just looked GREAT that way…

The little things (soul patches?) look kinky to me. I notice that white jazz guys have 'em, along with the little African-y caps.