Knacked Tenon repair.

It’s not my flute, so I don’t have any pictures right now - I’ll try to get some though.

The flute is an oldish one key boxwood flute in D. The single key is very loose, but that is not my problem right now. The flute has a chunk (about 2 sqaure cm?) of its top tenon (connecting to Barrel) broken off. It is currently held together by the thread wrapping, but is obviously neither very stable, nor airtight. The chunk is basically an arc of the tenon, extending most of thway to the body of the flute. There are maybe five mm between the end of the missing chunk and the body of the flute. If that?

What would be the best approach here? Extract the chunk, glue it together and then wrap with some load-bearing thread, e.g. silk, or carbon fibre, or whatever I can find in my sewing box :confused: Or some rebuild approach replacing some portion of the flute with new wood or other material and re-turning to fit? A complete new metal tenon, fixed in the body of the flute with cork a la McGee Improved Tuning Slide? The tenon itself is only about 1-2 mm thick. The flute orginally cost my friend 120 Euros second hand and has other cracks and the key needs fixing too. I cannot see any maker’s mark on the flute, so I don’t have any idea of the potential value of the flute.

All hints or tips gratefully received.

Thanks,

Chris.

I’d say, show it to a competent person :wink:

If you can’t do that immediately, then glue the broken piece with green cyanolit (crazy glue), it is easy to remove with acetone if the flute deserves a more professionnal repair.

And if it is not worth repairing, that simple fix will at least make it playable.