Anyone give good dimensions for C & C# staples. Length, I.D. and eye width & depth? My notes are in a box under a box under a box somewhere etc.,
Thanks
Alan
Narrow bore? 52mm long blank, 11.2 by 12.3 seem like good numbers, roughly. Beats me about the eye. Openish, a titch more than CP likes.
I thought you knew everything, Alan!
The day I know everything, I give up the pipes. They’re only fun when they’re not working 
What’s the 11.2 - 12.3? head width? Any help on the I.D. 3.5 - 3.75mm? Any takers on 3.5 - 3.75mm?
Alan
Naw, 11.2 by 12.3 for the staple blank. Heads I never go above 11mm.
<Heads I never go above 11mm.>
Tails you do? 
Weeell, it worked out as :- Head at 11.3mm, Staple at 50mm. I.D. at 3.7mm. Pitched at between C and C#, slightly slightly flat Back D, but nicely in tune with itself otherwise. Obviouslyt gonna be C# in this instance…
Thanks for your input Kevin, I don’t work on Flatties very often, I was expecting a whole rake of info from all you confirmed Flat players…
Alan