breaking in a new Copley

greetings all–

I just became the proud new owner of a Copley & Boegli 6-hole slideless blackwood flute, and would like opinions on Dave’s recommended breaking-in process for those of you who have Copleys or otherwise have some knowledge about his flutes. I have the instruction sheet that came with the flute, but there’s not much on how he recommends breaking in the flute (sent Dave a message yesterday, but now I seem to recall that he may be out of town for awhile). I’ve had one flute before this–a Casey Burns folk flute–so I’m familar with the overall method in the breaking-in period, but since so many flute makers seem to have somewhat different guidelines, I’d like to follow what Dave has advised other Copley owners, since it may take Dave time to get back to me. Appreciate any suggestions from you all.

As long as we’re on the topic of flute care, I’ll go ahead and ask about oil, already knowing that it’s a somewhat controversial matter. I used almond oil (with vitamin E) on the CB flute I had, which seemed to work well. However, Dave Copley suggests woodwind bore oil as his preference (though he says that linseed oil and almond oil are ok as well), so I’m inclined to follow his advice. Now, the woodwind oil I seem to find at music stores is really inexpensive (like under $5 a bottle), so I’m wondering if there’s a higher-grade bore oil that I should use rather than the kind I’m finding. Appreciate any feedback.

In the meantime, I’m anxious to begin a long-lasting relationship with my new Copley-Boegli flute, just as soon as I come home from work today…

cheers
stephen

You might write Dave, of course.

I think almond oil is fine.

As I recall Dave doesn’t have a break-in regimen–you can
play the flute a good deal from the first. However that
concerned a flute with a lined head and it was awhile
ago. So, again, you would do well to check with him.

I got a 6 key Copley (blackwood with tuning slide) about a year and a half ago. I didn’t really do anything special as far as play-in and I don’t believe anything was recommended.

I use woodwind bore oil that I got online from “Bore Doctor.” Since I live in a dry part of the world, Mr. Copley cautioned me about keeping the flute properly oiled and humidified. When I’m not playing it, I keep it in a cigar humidor at ~60% RH.

I hope you enjoy your Copley has much as I have mine.

Heck, if it makes people feel like they’re treating their flute better, I’ll whip up some woodwind oil that costs $100 an ounce! :laughing:


Seriously though, bore oil is bore oil.


Loren

Sounds to me like you have purchased a used Copley flute from someone else, rather than a new flute straight from Mr. Copley. If that’s the case, it may already be “broken in”, assuming the person you purchased it from was playing it regularly. If not, then I second others’ advice to ask Mr. Copley - I believe he’s fairly accessible by modern means of communication. (At least no one has ever mentioned to me that he’s Amish, although I suppose he could be…)

But if you can’t reach him, or if whoever you bought the flute from wasn’t playing it much lately, or if it came to you from another country or region with a much drier climate than yours, or if it was shipped via air freight, the prudent course of action would be to break it in a bit before taking it to an all-night session and playing the hell out of it. The method of break-in for a wooden flute is fairly standard, in that it’s mainly common sense. Wood flutes absorb and give off moisture. They can go from being saturated to being bone dry, and it’s not either one of those states that causes cracks but rather a too-swift change from one to the other. Flutes that haven’t been played will dry out, and the longer they haven’t been played the drier they get. Similarly, the longer they’re played in a given sitting, the wetter they’ll get. So the goal of any break-in scheme is to introduce the flute to moisture gradually rather than suddenly. Although they vary in the specifics, what any maker will tell you with regard to break-in is to start off with a short period of playing on the first day (15-30 mins) and then each day increase the playing time by 5-10 minutes, until after a week or so of doing this you’ve pretty much got it broken in. The two very best things you can do to avoid cracks in a wooden flute are to play it a lot (after you’ve got it broken in, of course), and when you’re not playing it, keep it in a humidified environment (a Tupperware with one of those humidifiers you soak in water does this quite well and cheaply). Occasional oiling is okay too, but IMHO oil is really only necessary as a band-aid for times when you’ve been a bit lax in keeping the flute humidified. Non-mineral oils that don’t go rancid are best (almond, flaxseed, raw linseed, olive, etc).

http://www.celticlands.com/page12.html

This may be of some help, too.

I recently - two months ago - bought a slideless head for my Copley and Dave recommended I “don’t overdo it for a few weeks”. I gave it a half to three quarters of an hour a day and then after a week or so played as much or as little as I felt like. I will occasionally play two flutes during a practice/play time sometimes play only one for an hour or more. I have not had any problems with any of the flutes I play using the above.

For oil, I picked a great suggestion from this site recently about mixing 1 part Almond Oil with four parts Extra Light Olive Oil - its the greatest! Seemed to last much long and gave a more polished look to the bore for quite a while.

BillG

nothing beats monkey blood.

tacky, mate, tacky

I actually spoke with Dave later today (he was home after all)—his advice was to play no more than 30 minutes a time and no more than twice a day for the first couple of weeks, then to feel free to increase playing time after that. In comparison to guidelines from some other flute makers, he certainly seems a bit more liberal about the breaking-in process, in fact his advice was essentially to follow the “common denominator” (my phrase, not his, but essentially how he put it) of other makers’ recommendations.

now just to finish up the work day and head home for a long-awaited first practice session on the new Copley-Boegli…

cheers

Stiofan

I’ve always heard 10 minutes playing at a time to start, but I suppose a half hour isn’t pushing it too far either. I have had a Copley and Boegli for a couple years now. I can’t say anything but good things about them. I remember getting used to emboucher requirements took a while, but well worth the work. They seem to really capture the best qualities of both Pratten and Rudall style flutes. Mine, however, is lined so probably differs a bit. I’m one of those shameless folks from the “don’t oil much” camp of fluters. I’ve only oiled mine once or twice since I got it. Both of the flutes that I had prior to this I oiled frequently, but they both cracked. I don’t think it was the oil that cracked them, but my storage method. I now keep my flutes in a more or less airtight container, don’t oil, and my only humidifier is the moisture from my swab cloth. Since the wood never gets overly dry, it still looks as nice as if I had been oiling it.

Enjoy your new flute.
Stephen

I think Dave’s relaxed attitude to breaking in a flute is a good one. Don’t overdo it for the first few weeks, and you will be fine. No need to get hysterical as to whether 10 or 15 minutes a day is or isn’t too much.

And as Loren said, bore oil is bore oil. Mineral or vegetable. Personally I have always used standard woodwind (mineral) bore oil from a music shop on my Copley, and it has worked fine. Again, don’t overdo it.

I think Dave is using very well seasoned wood.
I think he thinks, and for good reason, that his
flutes are unlikely to crack.

Some makers (e.g. Sweet) will tell you that a break-in period is not even necessary, as the finished flutes have been soaked in tung oil for an extended period, and the grain is permeated. Don’t know if this applies to many others, though. BTW, what’s a tung? :stuck_out_tongue:

tung is a tree
tung oil is the pressing of it’s seed