200 year old baritone regulator

Uilleann Pipes
1

Any Idea what note’s this reg was made to play… It only has three keys… Thank’s.

http://users.aol.com/wgority/bari.gif

2

If you repeat the calculations of the last page of Reedmaking For Uilleann Pipers, 2nd Edition - Laurie & Eddie Climo at www.swaup.org somethings should come out

3

And while you’re there, check out and download this reed making info, very nicely done. It is one of the many references I consult for reed making tips.

http://swaup.mogsoft.com/reedscreen.pdf

Plus, if they have the good taste to post a noble image of this reed making guru…




… you know the site is pretty darn good, eh? :smiley:

4

The early days of the Union Pipes (Uilleann pipes were not invented until the ‘Flood’ :smiling_imp:) were times of experimentation and regulators key configurations were not standardised. Tenor regulators had 4 to 5 keys or occasionally more which in the case below is 8

This set only 4

With this one the Tenor and Baritone have short keys and the site this came from says the tenor gives the notes f#,g,a,b and baritone d,e,f#,g

Not very clear but there appears to be an extra key on the Baritone and just a single key on a very long curved bass regulator. This seems a lot of work to supply just one note.




Edited to add
The above photos are reproduced from Michael MacHarg’s and Chris Bayley’s websites - apologies for this omission

5

Interesting Thanks…

6

If you squint hard at this you’ll notice it also has an extra “rank” of chords - i.e., the middle reg has 6 keys, the bass and small 5. What the notes were I couldn’t tell you - B/C#, going high? Or C/Fnat, going low? The piper it was made for, Charles Ferguson, was one of the many pipers in the old days who exclusively played airs, marches, song tunes, and the like.

7

Have received a friendly wrist smack reminding me that if I reference items from peoples sites they should be acknowledged

Sorry to Michael MacHarg and Chris Bayley - have added a footnote to the posting

Elmek

8

I’m going to be working on recreating the regulators from this set over the course of this summer. I’ll let you know how it goes and what the sounding notes are.

Bill